Popular searches

Didn't find it? Write to us
Releases and updates

GEO5 2027: Multiple Calculations in One Project and Next-Generation Eurocodes

Fine Software has released GEO5 2027. The new version lets you keep several calculation tasks in one file and design according to the second generation of Eurocode 7. It also adds p-y curves for piles and assessment of sand liquefaction during earthquakes, while Stratigraphy and FEM receive significant improvements. Here are the key changes.

CAD.kz editorial team

Contents

Multiple Tasks in One File

You can now solve several independent calculation tasks of the same type within a single file. Soil types and material properties are entered once and shared by all tasks, while geometry, soil combinations and the geological profile can be defined separately for each task. Switch quickly between tasks and compare their results. No more dozens of separate files for variants of the same calculation.

In Prefab Wall and Redi-Rock Wall, individual tasks can be defined as cross-sections through 3D structures. Future editions are planned to link tasks to the site plan.

Available in: all GEO5 programs except Laboratory, Stratigraphy, FEM, Slope Stability, Settlement, Beam, Slab and Point Cloud.

Second-Generation Eurocode 7

GEO5 2027 supports design and verification according to the second generation of Eurocode 7 (EN 1997). Europe is already moving to the new Eurocodes, and the first generation will be withdrawn there on 30 March 2028. Current design codes in Kazakhstan are not changing yet, but you can get familiar with the new rules in advance, in the familiar GEO5 environment. This is also useful for projects designed to European standards.

  • input of the Consequence Class (CC), which determines the required level of reliability;
  • the new system of limit state verification: Material Factor Approach (MFA) and Resistance Factor Approach (RFA).

National Annexes will be added after their official publication, no earlier than in the 2028 Edition.

Available in: Slope Stability, Gravity Wall, Cantilever Wall, Masonry Wall, Gabion, Prefab Wall, Abutment, Earth Pressures, Sheeting Design, Pile, Spread Footing, Pile Group, Redi-Rock Wall, Nailed Slope, MSE Wall, Rock Stability, Shaft.

Pile: Analysis Using p-y Curves

The Pile program now analyses laterally loaded piles using p-y curves. The method is an established design approach in North and South America and other English-speaking countries.

Curves are implemented for a range of ground conditions
clays (Matlock, API, Welch, Reese), sand (Reese), liquefied sand (Rollins), weak and strong rock (Reese, Nyman), as well as curves derived from DMT and CPT field tests for clays, sands and loess.
The key advantage over competing solutions
p-y curves are created directly from DMT and CPT field test data.

Sand Liquefaction During Earthquakes

The Pile CPT program can assess liquefaction of sandy layers using CPT or SPT data:

  • identify depths and layers with a higher susceptibility to liquefaction;
  • include seismic risk in the same environment where you design foundations.

In the seismic regions of Kazakhstan this is one of the key risks, and it can now be assessed directly from standard site investigation data.

DMT Field Tests: From Measurements to Design

DMT and SDMT results are imported into GEO5 using the UNI format. The program classifies soils, creates a layered profile and derives geotechnical parameters. The data are used in design directly, without manual conversion or repeated input.

  • p-y curves from DMT for laterally loaded piles in clays;
  • bearing capacity and settlement of spread footings;
  • modulus of subgrade reaction from DMT for sheeting structures;
  • settlement analysis using the dilatometer modulus.

Available in: Pile, Spread Footing.

Stratigraphy: Cross-Sections, CAD Backgrounds and 3D Models

The improvements in Stratigraphy are based on user feedback and experience from real projects.

Working with CAD Files

  • import of the site boundary and alignment of linear structures from CAD, including straight and curved sections;
  • import of geological cross-section topology from CAD;
  • CAD files and images as backgrounds for cross-sections and terrain;
  • working with multiple backgrounds simultaneously and blending them.

Geological Cross-Sections

  • more tools for creating and editing cross-sections;
  • assignment of multiple field tests to one cross-section;
  • GEO5 Drawing Editor integrated into the cross-section workflow;
  • automatically generated geological legend in the drawing.

Models and Reports

  • new 3D mesh generator for terrain, subsoil, sections and resulting solids;
  • improved export to CAD and IFC with conversion of the model into solids;
  • soil classification and geological profile creation from DMT results;
  • batch export of field test reports;
  • expanded options for output reports.

Data Exchange

  • import from the Geosetta platform with publicly available historical site investigation data from the USA, Japan, Canada, the United Kingdom and several European countries;
  • export to the SEP3 format;
  • custom map layers from WMS and ArcGIS map servers.

FEM: New Material Models and Faster Calculations

  • new material models: Jointed Rock for jointed rock masses, Anisotropic Modified Cam-Clay for fine-grained soils with anisotropy and stress history, Hypoplastic Sand for the nonlinear behaviour of sands;
  • Barton–Bandis model for contact elements in rock engineering analyses;
  • tilted sections along an arbitrary line, at any location and in any direction;
  • export of results from beams, contacts and tilted sections;
  • the K0 procedure uses multiple CPU cores, so the initial stress state of complex models is calculated faster.

Nailed Slope

  • punching shear verification of the facing at the nail head;
  • internal stability verification for a construction stage before the lowest row of nails is installed;
  • different inclinations for individual nails instead of one common inclination;
  • μ factor procedure for the Japanese market, accounting for the effect of the facing.

Sheeting, Earth Pressures and Shafts

  • oval shafts in the Shaft program;
  • cross-section degradation in the Sheeting Check program;
  • new structure of two I-sections with corrosion taken into account;
  • minimum design pressure applied either to the total pressure or to the earth pressure only.

New Manufacturer Catalogues

  • TITAN — micropiles (MSE Wall, Prefab Wall);
  • Armatex — reinforcements (sheeting, slope stability);
  • Profextru — plastic sheet piles;
  • VPA — sheet piles (Sheeting Design, Sheeting Check).

Coming Soon: AI Integration

During 2027, one of the GEO5 updates will add an MCP server (Model Context Protocol). It will allow GEO5 to connect to modern AI tools and automate workflows.